Skip to main content
Version: 2.4.x.x Java 8 ELS

Release notes

nevisFIDO 2.4.7.1 - 30.08.2024​

Changes and new features​

General Changes​

  • UPGRADED: We upgraded Spring third-party dependencies to version 5.3.39. (NEVISFIDO-2167)

nevisFIDO 2.4.6.1 - 26.06.2024​

Changes and new features​

Breaking changes​

General Changes​

  • FIXED: The registration and authentication response endpoints now correctly return UAF status code 1492 Unacceptable Authenticator in case the UAF policy does not allow the authenticator, instead of UAF status code 1498 Unacceptable Content. (NEVISFIDO-1940)
  • CHANGED: Errors occurring during the final challenge parameter validation in the authentication response service resulting in UAF status code 1491 Request Invalid are now logged on ERROR level. This can help to identify configuration problems (such as an incorrect appID in the Facets configuration) more quickly. (NEVISFIDO-2099)
  • FIXED: The HTTP Client used to connect to nevisIdm REST service and the Firebase Cloud Messaging service was in some cases incorrectly configured limiting the maximum allowed connections per route to 5. The intended default 50 is now properly used. (NEVISFIDO-2103)
  • FIXED: FIDO2 credentials that were not active in the credential repository were not being excluded during the authentication ceremony. (NEVISFIDO-2110)

nevisFIDO 2.4.5.2 - 15.05.2024​

Changes and new features​

  • FIXED: The session store incorrectly storing time data in certain cases when using MariaDB. This caused an error during daylight saving time switch in spring while 1 hour disappears from time. MariaDB JDBC driver defaulting to the server timezone caused to double convert from local timezone to UTC. Normally this does not cause any issue for nevisFIDO as the read/write uses the same logic. During the daylight saving time switch this causes a validation error at db that we try to insert a not existing (valid) time. Database connection session is now using UTC timezone to avoid this. Note that because of this change Sessions will expire earlier with the timezone offset. If this is not acceptable you can fix the data in the DB like this: update uaf_sessions set reap_timestamp = DATE_ADD(reap_timestamp, INTERVAL 2 HOUR), created = DATE_ADD(created, INTERVAL 2 HOUR), status_updated = DATE_ADD(status_updated, INTERVAL 2 HOUR); update token_sessions set reap_timestamp = DATE_ADD(reap_timestamp, INTERVAL 2 HOUR), created = DATE_ADD(created, INTERVAL 2 HOUR), status_updated = DATE_ADD(status_updated, INTERVAL 2 HOUR); update webauthn_sessions set reap_timestamp = DATE_ADD(reap_timestamp, INTERVAL 2 HOUR), created = DATE_ADD(created, INTERVAL 2 HOUR), status_updated_at = DATE_ADD(status_updated_at, INTERVAL 2 HOUR); These statements assume Central European Time and that the data was created in Summer time. (With winter time you have to add only 1 hour) In case of getting an error like Unknown or incorrect time zone: 'UTC' afterwards that means your database did not have the timezone database initilized. You have to run mysql_tzinfo_to_sql /usr/share/zoneinfo | mysql -u root mysql -p to verifiy the result of that you can run SELECT * FROM mysql.time_zone_name;. Note that this will only impact you if you upgrading from the java8 els versions or any rolling version >= 2.4.0.7. Upgrading from LTS21 is not impacted as LTS21 does not have this issue yet as it was introduced in NEVISFIDO-1817. (NEVISFIDO-2080)
  • FIXED: Session update operations did not check if the update was successful. (NEVISFIDO-2050)
  • UPGRADED: We upgraded the Bouncy Castle third-party dependencies to version 1.78. (NEVISFIDO-2062)
  • UPGRADED: We upgraded the Jackson third-party dependencies to version 2.17.0. (NEVISFIDO-2006)
  • UPGRADED: We updated the Jetty third-party dependency to version 9.4.54.v20240208. (NEVISFIDO-2006)
  • UPGRADED: We upgraded the PostgreSQL jdbc driver third-party dependency to version 42.7.2. (NEVISFIDO-2017)
  • UPGRADED: We upgraded Spring third-party dependencies to version 5.3.34. (NEVISFIDO-2065)

nevisFIDO 2.4.4.2 - 21.02.2024​

Changes and new features​

  • UPGRADED: We upgraded Bouncy Castle third-party dependencies to version 1.77. (NEVISFIDO-1984)
  • UPGRADED: We upgraded the jackson third-party dependencies to version 2.16.1. (NEVISFIDO-1975)
  • UPGRADED: We upgraded Logback third-party dependency to version 1.2.13. (NEVISFIDO-1983)
  • UPGRADED: We updated the Nimbus-jose-jwt third-party dependency to version 9.37.3. (NEVISFIDO-2014)
  • UPGRADED: We upgraded Spring Boot third-party dependencies to version 2.7.18. (NEVISFIDO-1974)
  • REMOVED: Not used test artifacts of the Webauthn4j third-party dependency were removed as they are not used. (NEVISFIDO-1984)

nevisFIDO 2.4.3.1 - 05.12.2023​

  • FIXED: nevisFIDO no longer sends push notifications to dispatch targets the user had disabled. (NEVISFIDO-1977)

nevisFIDO 2.4.2.1 - 15.11.2023​

Changes and new features​

  • UPGRADED: We updated the Jetty third-party dependency to version 9.4.53.v20231009. (NEVISFIDO-1931)
  • CHANGED: We now set the java.io.tmpdir system property by default to /var/opt/nevisfido/<instance>/tmp. When nevisfido is started, Jetty requires it at runtime. Originally the system /tmp folder was used for this purpose, however at some cases it can happen that a system cleanup job deletes the Jetty prefixed directories which causes nevisfido to return errors. (NEVISAUTH-4461)
  • UPGRADED: We upgraded the xmlsec third-party dependency to version 3.0.3. (NEVISFIDO-1939)

nevisFIDO 2.4.1.1 - 28.08.2023​

Changes and new features​

  • FIXED: We removed an SQL statement from the nevisFIDO code which was incompatible with the older MariaDB version 10.3. Having the script there was a mistake, as the automatic DB schema creation supports setting up the database from scratch. In non-Kubernetes-based setups, any later patches must be applied manually from the release notes here. Note that the ALTER privileges were possibly not granted to your schema user so far. In this case, execute GRANT CREATE, ALTER ON nevisfido.* TO 'schema-user'@'localhost'; (with the appropriate username and host). The release notes of 2.4.0.7 originally did not contain the alter table script for the UAF policy column, which was now added. For non-Kubernetes-based setups, here is the script if you have not run it yet: (NEVISFIDO-1912)
ALTER TABLE uaf_sessions
  ADD COLUMN IF NOT EXISTS `policy` VARCHAR(128) NULL AFTER `user_id`;

nevisFIDO 2.4.0.7 - 16.08.2023​

Breaking changes​

  • FIXED: We fixed the incorrectly stored system default timezone timestamps in the database. After the fix, only UTC timestamps will be stored. Existing data can be migrated with the following script if required. (in case your nevisFIDO instance was NOT running in UTC, or existing sessions are required to keep consistent) Replace the proper timezone information in the script where nevisFIDO was running! When you check the data, note that mysql or any other client will convert timestamps to the timezone of the session. So in order to see the UTC timestamp values in your sql client you have to change your client's session timezone to UTC in the current session: SET @@session.time_zone = '+00:00';. (NEVISFIDO-1817)
   UPDATE uaf_sessions SET created = CONVERT_TZ(created, 'Europe/Zurich', 'UTC'), status_updated = CONVERT_TZ(status_updated, 'Europe/Zurich', 'UTC'), reap_timestamp = CONVERT_TZ(reap_timestamp, 'Europe/Zurich', 'UTC');
   UPDATE token_sessions SET created = CONVERT_TZ(created, 'Europe/Zurich', 'UTC'), status_updated = CONVERT_TZ(status_updated, 'Europe/Zurich', 'UTC'), reap_timestamp = CONVERT_TZ(reap_timestamp, 'Europe/Zurich', 'UTC');
   UPDATE webauthn_sessions SET created = CONVERT_TZ(created, 'Europe/Zurich', 'UTC'), status_updated_at = CONVERT_TZ(status_updated_at, 'Europe/Zurich', 'UTC'), reap_timestamp = CONVERT_TZ(reap_timestamp, 'Europe/Zurich', 'UTC');
  • FIXED: Session creation time was incorrectly overwritten during updates, because of the MariaDB behaviour defined here. For non docker based setups the following script should be manually run:
   ALTER TABLE uaf_sessions MODIFY COLUMN `created` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE uaf_sessions MODIFY COLUMN `status_updated` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE uaf_sessions MODIFY COLUMN `reap_timestamp` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);   
   ALTER TABLE token_sessions MODIFY COLUMN `created` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE token_sessions MODIFY COLUMN `status_updated` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE token_sessions MODIFY COLUMN `reap_timestamp` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE webauthn_sessions MODIFY COLUMN `created` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE webauthn_sessions MODIFY COLUMN `status_updated_at` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
   ALTER TABLE webauthn_sessions MODIFY COLUMN `reap_timestamp` TIMESTAMP(6) NOT NULL DEFAULT CURRENT_TIMESTAMP(6);
  • FIXED: an unknown username received across nevisFIDO API's have been standardized to return either HTTP 403 Forbidden, UAF statusCode 1403, or in case of dispatching with a new dispatchResult: userNotFound. (NEVISFIDO-1889)
  • CHANGED: The loginId of the user is now stored in WebAuthn sessions in the database. (NEVISFIDO-1877) For non docker based setups, the following script should be run manually:
ALTER TABLE webauthn_sessions
    ADD COLUMN login_id VARCHAR(300) NULL;
  • CHANGED: The length of the user_name column of loginId in nevisIDM, now supports up to 300 characters. The error_message column is changed to be able to store text dynamically which allows larger error messages to be stored in the session. (NEVISFIDO-1873) For non docker based setups the following script should be run manually:
ALTER TABLE webauthn_sessions
    MODIFY COLUMN user_name VARCHAR(300),
    MODIFY COLUMN error_message TEXT;
  • NEW: The user agent information for the FIDO UAF dispatch targets are now stored in nevisIDM using the custom property fidouaf_user_agent upon creation or modification of the dispatch target. This custom property is new, make sure it exists in nevisIdm. The latest nevisIdm migration scripts contain it. (NEVISFIDO-1829)
  • FIXED: Unknown object and array properties in incoming JSON payloads are now properly ignored upon parsing. Additionally, the nested properties of unknown JSON objects and arrays are no longer logged. (NEVISFIDO-1908)
  • NEW: nevisFIDO supports multiple policies. Refer to the concept guide for additional details. For non-Kubernetes-based setups, the following script should be manually run: (NEVISFIDO-1843)
ALTER TABLE uaf_sessions
  ADD COLUMN IF NOT EXISTS `policy` VARCHAR(128) NULL AFTER `user_id`;

Changes and new features​

  • UPGRADED: We updated the Checker Framework third-party dependency to version 3.36.0. (NEVISFIDO-1871)
  • UPGRADED: We updated the commons-io third-party dependency to version 2.13.0. (NEVISFIDO-1871)
  • UPGRADED: We updated the Google-auth-library-oauth2-http third-party dependency to version 1.19.0. (NEVISFIDO-1871)
  • UPGRADED: We updated the Guava third-party dependency to version 32.1.1-jre. (NEVISFIDO-1871)
  • UPGRADED: We updated the Jackson third-party dependency to version 2.15.2. (NEVISFIDO-1871)
  • UPGRADED: We updated the Jaxb third-party dependency to version 2.3.6. (NEVISFIDO-1871)
  • UPGRADED: We upgraded Spring Boot third-party dependencies to version 2.7.14. (NEVISFIDO-1871)
  • FIXED: Special characters (á,é, etc) in userFriendlyName fails to create the FIDO2 credential in nevisIDM. (NEVISFIDO-1865)
  • FIXED: Sending push notifications is no longer attempted via FCM when the push notification is disabled. (NEVISFIDO-1879)
  • NEW: nevisfIDO supports the Device Passcode Authenticator. (NEVISFIDO-1896)
  • EXPERIMENTAL: Introduced support for PostgreSQL 15.0-15.3 databases for the session repository. (NEVISFIDO-1910)

nevisFIDO 2.3.1.0 - 05.06.2023​

Changes and new features​

  • FIXED: Special characters (á,é, etc) in userFriendlyName fails to create the FIDO2 credential in nevisIDM. (NEVISFIDO-1865)

nevisFIDO 2.3.0.8 - 17.05.2023​

Breaking changes​

  • REMOVED: We removed the vmargs legacy command in administrative cli. Use the nevisfido <instance> config env to configure the JAVA_OPTS. (NEVISAUTH-3134)
  • UPGRADED: We upgraded the mariadb-java-client third-party dependency to version 3.1.2. In case you used configuration parameters in the JDBC url check the removed options here. Other notable difference is that the driver no longer sets certain properties including the autocommit, check your database configuration and add the ?autocommit=true to your connection url if needed. The new driver also allows better logging options, see here. This release note was missing from the 2022 August release. (NEVISFIDO-1769)
  • CHANGED: We greatly simplified the username mapping in nevisFIDO to avoid integration pitfalls and potential use-case errors. The credential-repository.username-mapper configuration block is now replaced by a single property user-attribute.

Changes and new features​

  • FIXED: The nevisfido-server CLI not properly parsing multiple options specified in the JAVA_OPTS. (NEVISFIDO-1786)
  • FIXED: Dispatch token issue with push dispatching in the OutOfBandFidoUafAuthState where the dispatcher property was set as auth state property but the dispatchTargetId was not provided. (NEVISFIDO-1855)
  • UPGRADED: We updated the Checker Framework third-party dependency to version 3.32.0. (NEVISFIDO-1833)
  • UPGRADED: We updated the Jackson third-party dependency to version 2.15.0. (NEVISFIDO-1761)
  • UPGRADED: We updated the Google-api-client third-party dependency to version 2.2.0. (NEVISFIDO-1833)
  • UPGRADED: We updated the Google-auth-library-oauth2-http third-party dependency to version 1.16.1. (NEVISFIDO-1833)
  • UPGRADED: MariaDB jdbc driver third party dependency is updated to version 3.1.3. (NEVISFIDO-1833)
  • UPGRADED: We updated the Nimbus-jose-jwt third-party dependency to version 9.31. (NEVISFIDO-1833)
  • UPGRADED: We upgraded Snakeyaml third-party dependencies to version 2.0. (NEVISFIDO-1761)
  • UPGRADED: We upgraded Spring Boot third-party dependencies to version 2.7.11. (NEVISFIDO-1844)
  • UPGRADED: We upgraded Spring third-party dependencies to version 5.3.27. (NEVISFIDO-1833)
  • UPGRADED: We updated the Webauthn4j third-party dependency to version 0.21.1.RELEASE. (NEVISFIDO-1833)
  • UPGRADED: We updated the Woodstox-core third-party dependency to version 6.5.1. (NEVISFIDO-1844)
  • NEW: The Fido2AuthState now supports usernameless authentication. Note, that this is not yet supported in the Admin4 patterns. (NEVISFIDO-1789)

nevisFIDO 2.2.1.0 - 17.05.2023​

  • FIXED: Dispatch token issue with push dispatching in the OutOfBandFidoUafAuthState where the dispatcher property was set as auth state property but the dispatchTargetId was not provided. (NEVISFIDO-1855)

nevisFIDO 2.2.0.8 - 15.02.2023​

Breaking changes​

  • CHANGED: The nevisFIDO AuthStates delivered in the nevisfidocl package use the HttpClient introduced in nevisAuth. This means that the configuration of the key material for the AuthStates has changed.
    • Instead of trustStoreRef use httpclient.tls.trustStoreRef.
    • Instead of keyStoreRef and keyObjectRef use httpclient.tls.keyObjectRef. If the previous keyObjectRef was unique, you can drop the value in keyStoreRef. Otherwise, use the value in the new property like the following: value of keyStoreRef / value of keyObjectRef

Changes and new features​

  • NEW: The OutOfBandFidoUafAuthState now supports the Usernameless Authentication scenario. We recommend configuration of this use case using nevisAdmin4 patterns. (NEVISFIDO-1765)
  • FIXED: The session reaper does not fail with an ERROR_REAPING_SESSIONS_FROM_SQL_STORAGE error when FIDO2 is not configured. (NEVISFIDO-1748)
  • UPGRADED: We upgraded Apache HttpClient third-party dependencies to version 5.2.1. (NEVISFIDO-1735)
  • UPGRADED: We upgraded jcan-sectoken to not use jcan-commons. jcan-commons is no longer shipped. (NEVISAUTH-3861)
  • UPGRADED: We upgraded Spring Boot third-party dependencies to version 2.7.7. (NEVISFIDO-1734)
  • UPGRADED: We updated the Checker Framework third-party dependency to version 3.29.0. (NEVISFIDO-1734)
  • UPGRADED: We updated the Jackson third-party dependency to version 2.14.1. (NEVISFIDO-1734)
  • UPGRADED: We updated the Google-autovalue third-party dependency to version 1.10.1. (NEVISFIDO-1734)
  • UPGRADED: We updated the Google-api-client third-party dependency to version 2.1.3. (NEVISFIDO-1734)
  • UPGRADED: We updated the Google-auth-library-oauth2-http third-party dependency to version 1.14.0. (NEVISFIDO-1734)
  • UPGRADED: We updated the Nimbus-jose-jwt third-party dependency to version 9.29. (NEVISFIDO-1734)
  • UPGRADED: We updated the SnakeYaml third-party dependency to version 1.33. (NEVISFIDO-1734)
  • UPGRADED: We updated the Webauthn4j third-party dependency to version 0.20.7.RELEASE. (NEVISFIDO-1734)
  • UPGRADED: We updated the Woodstox-core third-party dependency to version 6.5.0. (NEVISFIDO-1758)
  • UPGRADED: We updated the ZXing third-party dependency to version 3.5.1. (NEVISFIDO-1734)
  • REMOVED: We removed the internal dependency to nevis-i18n. (NEVISFIDO-1722)

nevisFIDO 2.1.1.2 - 24.11.2022​

Changes and new features​

  • FIXED: The nevisIDM user lookup was broken when using FIDO UAF only in the configuration. The use-case connects to nevisIDM using the soap interface where the detail level was incorrectly set to exclude. The detail level is now reset to low to fix the issue. (NEVISFIDO-1742)

nevisFIDO 2.1.0.3 - 16.11.2022​

Changes and new features​

  • UPGRADED: We upgraded Spring Boot third-party dependencies to version 2.7.3. (NEVISFIDO-1707)
  • UPGRADED: We updated the Checker Framework third-party dependency to version 3.25.0. (NEVISFIDO-1707)
  • UPGRADED: We updated the Jackson third party dependency to version 2.13.4. (NEVISFIDO-1707)
  • UPGRADED: We updated the Google-api-client third-party dependency to version 2.0.0. (NEVISFIDO-1687)
  • UPGRADED: We updated the Google-auth-library-oauth2-http third-party dependency to version 1.11.0. (NEVISFIDO-1707)
  • UPGRADED: We updated the Nimbus-jose-jwt third-party dependency to version 9.25. (NEVISFIDO-1707)
  • UPGRADED: We updated the Webauthn4j third-party dependency to version 0.20.3.RELEASE. (NEVISFIDO-1707)
  • UPGRADED: We updated the SnakeYaml third party dependency to version 1.32. (NEVISFIDO-1707)
  • FIXED: The client-id of the credential-repository is now parsed as a string, instead of as an integer. (NEVISFIDO-1715)
  • FIXED: We decreased the detail level of the username lookup query to nevisIDM using username-mapper. The fix affects UAF only, and provides performance increase on nevisIDM side. (NEVISFIDO-1665)
  • FIXED: Double query of nevisIDM credentials in case of UAF authentication is now reduced by request-scoped caching. (NEVISFIDO-1673)
  • FIXED: The expected position of extId inside username-mapper in the configuration is now validated at startup time. (NEVISFIDO-1701)
  • FIXED: From now on, REST query to nevisIDM is not sent to look up the extId if an empty or missing username is received from the client in the JSON request. (NEVISFIDO-1701)

nevisFIDO 2.0.1.6 - 17.08.2022​

Changes and new features

Breaking changes​

  • NEW: FIDO2 is now supported by the component. For more information, see Nevis FIDO2 / WebAuthn Concept and Integration Guide.
  • NEW: FIDO2 uses the nevisIDM REST API, configure the rest-url property for the credential-repository.
    • FIDO UAF still uses the SOAP endpoint, which requires administration-url to be configured.
  • CHANGED: Configuring FIDO2 and FIDO UAF leads to the following changes in the nevisFIDO instance configuration YAML file:
    • Both the fido2 and fido-uaf blocks have a Boolean property enabled.
      • For backwards compatibility, the change for fido-uaf is not mandatory, and if the enabled property is missing, then the deciding factor is whether the fido-uaf configuration block is present.
    • The top-level configuration block authorization is now present under the fido-uaf and fido2 blocks.
    • The top-level configuration block dispatchers is now present under the fido-uaf block.
    • Instead of deprecated the top-level configuration block dispatch-target-repository, use credential-repository instead.
  • UPGRADED: We upgraded the mariadb-java-client third-party dependency to version 3.1.2. In case you used configuration parameters in the JDBC url check the removed options here. Other notable difference is that the driver no longer sets certain properties including the autocommit check your database configuration and add the ?autocommit=true to your connection url if needed. The new driver also allows better logging options, see here. (NEVISFIDO-1769)

General

  • UPGRADED: Jackson third party dependencies are upgraded to version 2.13.3. (NEVISFIDO-1623
  • UPGRADED: Jetty third party dependencies are upgraded to version 9.4.48.v20220622 (NEVISFIDO-1657)
  • UPGRADED: Google-api-client third party dependency is updated to version 1.35.2. (NEVISFIDO-1623)
  • UPGRADED: Checker framework third party dependency is updated to version 3.22.2. (NEVISFIDO-1623)
  • UPGRADED: Nimbus third party dependency is updated to version 9.23. (NEVISFIDO-1623)
  • UPGRADED: Google-auth-library-oauth2-http third party dependency is updated to version 1.8.0. (NEVISFIDO-1623)
  • UPGRADED: Zxing third party dependency is updated to version 3.5.0. (NEVISFIDO-1623)
  • FIXED: The facet configuration property is now not incorrectly logged as unknown. (NEVISFIDO-1631)
  • FIXED: The admin CLI now correctly lists instances located in a symlink directory. (NEVISFIDO-1635)
  • FIXED: Component version in jar manifest files and logs. (NEVISFIDO-1662)

nevisFIDO 1.18.0.4 - 18.05.2022​

Breaking changes​

  • DEPRECATED: The configuration property dispatch-target-repository is no longer parsed by the server. The configuration of credential-repository is used as the configuration of the dispatch target repository instead. (NEVISFIDO-1444)

We removed the dispatch-target-repository entry because separate configurations for the dispatch and credential repositories provides no added value. You can safely remove the dispatch-target-repositoryentry in the configuration YAML file completely, then the credential-repository configuration block is used. If you keep the dispatch-target-repository,the configuration is ignored and a warning is logged.

  • CHANGED: To address a potential performance bottleneck, we removed the dynamic reloading of the policy JSON configuration file. As a result, a nevisFIDO instance requires restart after changing the policy file. This is classified as a breaking change compared to previous behavior. The feature was not actively used, as nevisAdmin 4 and Kubernetes-based deployments restart the component after a configuration change. (NEVISFIDO-1591)

General

  • FIXED: nvluser, nvbuser, and members of the nevisadmin group could not use the nevisAuth Admin CLI commands. The issue is now fixed. (NEVISFIDO-1577)
  • UPGRADED: Spring-boot third party dependency is updated to version 2.6.7. (NEVISAUTH-3612)
  • UPGRADED: Google-api-client third party dependency is updated to version 1.34.0. (NEVISFIDO-1555)
  • UPGRADED: Guava third party dependency is updated to version 31.1-jre. (NEVISFIDO-1567)
  • UPGRADED: Jackson third party dependencies to version 2.13.2. and jackson-dababind to 2.13.2.2. (NEVISFIDO-1567)
  • UPGRADED: Auto-value third party dependency is updated to version 1.9. (NEVISFIDO-1567).
  • UPGRADED: Checker framework third party dependency is updated to version 3.21.4. (NEVISFIDO-1567)
  • UPGRADED: Reactive streams third party dependency is updated to version 1.0.3. (NEVISFIDO-1567)
  • UPGRADED: Rx java third party dependency is updated to version 2.2.21. (NEVISFIDO-1567)
  • UPGRADED: Nimbus third party dependency is updated to version 9.22. (NEVISFIDO-1567)
  • UPGRADED: Apache http client third party dependency is updated to version 4.5.13. (NEVISFIDO-1567)
  • UPGRADED: Bouncy castle third party dependency is updated to version 1.70. (NEVISFIDO-1567)
  • UPGRADED: MariaDB jdbc driver third party dependency is updated to version 2.7.5. (NEVISFIDO-1567)
  • UPGRADED: Google-auth-library-oauth2-http third party dependency is updated to version 1.6.0. (NEVISFIDO-1567)
  • UPGRADED: Zxing third party dependency is updated to version 3.4.1. (NEVISFIDO-1567)

nevisFIDO 1.17.0.1 - 16.02.2022​

Changes and new features

  • CHANGED: The iOS push notification sent via Firebase explicitly requests the default sound to be played. This fixes an issue where no sound is played on iPhones upon receiving the authentication push message. (NEVISFIDO-1528)

nevisFIDO 1.16.0.8 - 17.11.2021​

Changes and new features

  • NEW: The default metadata and policy of nevisFIDO now contains the new Android Nevis Access App biometric authenticator, identified with AAID F1D0#0003.

nevisFIDO 1.15.0.3 - 18.08.2021​

Changes and new features

  • NEW: As of this release, jcan.Op logging is available in nevisFIDO. You can use the transaction ID (tID) to correlate log lines between nevisProxy, nevisIDM and nevisFIDO. To enable the jcan.Op logging, add the following snippet to the file /var/opt/nevisfido/<instance>/conf/logback.xml:
    <logger name="jcan.Op" level="INFO" additivity="false">
        <appender-ref ref="STDOUT" />
        <appender-ref ref="FILE" />
    </logger>

The next code snippet shows an example output:

2021-06-07 10:39:17,362 10170 [qtp1638631856-21] INFO  jcan.Op 2 <<<<< rtCtx=defaultPackage/v1.0/defaultServerInstance, pCtx=7f000001/2995/6e4599c0, obj=ch.nevis.jca
n.optrace.web.RequestContextFilter, mth=GET /nevisfido/uaf/1.1/facets, tID=01000000-11aaf5-7f0100-179e5a047fb-00000094, pri=<anonymous>, sC=OK, dT=46ms, usedMem=276562808, freeMem=27
0269576, cR=0, httpSC=200, clID
  • CHANGE: From now on, the nevisFIDO API responds with the HTTP error code 405 Method not allowed in the case unsupported HTTP methods such as TRACE, HEAD and OPTIONS are used.
  • FIXED: The link dispatcher of nevisFIDO did not properly handle Custom URL Scheme with x-callback-url query parameters in the generated links, such as x-success, x-error and x-cancel. This bug is now fixed.
  • DEPRECATED: The Admin CLI command syntax is deprecated. The syntax will be standardized to match nevisAuth & nevisLogrend both in syntax and functionality with the November Rolling Release. For more information, see Admin CLI and RPM Installation Changes in 11.2021 RR Release]" on the NEVISDOC homepage. Note that the linked documentation does not mention the different syntax of nevisFIDO and its limited functionality.

nevisFIDO 1.14.0.1 - 05.05.2021​

Changes and new features

  • NEW: There is a new configuration attribute: fido-uaf.transaction-confirmation.max-text-length. The default value is "200" (characters), as defined in the FIDO specification. "200" is also the minimum value. The maximum value is "2000".

This new feature allows longer transaction confirmation messages than defined in the FIDO specification ("200"), because in some cases 200 characters may not be enough.

However, note that a maximum text length above "200" is beyond the FIDO specifications, which could lead to incompatibility with other systems. So before you set any other value than the default one, we recommend checking the documentation of the other components in the setup for compatibility.

  • FIXED: When a user wanted to modify an existing dispatch target, and included the current name of this dispatch target in the modify dispatch target request, the system incorrectly returned an HTTP 422 error response. This bug has now been fixed.

nevisFIDO 1.13.0.1 - 08.02.2021​

This is a technical release only.

Changes and new features

There are no changes or new features.