Skip to main content
Version: 3.7.x.x LTS

Configuration of an active or standby setup

The following tasks are necessary to configure an active/standby setup:

  1. Set the default gateway IP address and network mask within the zone hosting your servers.
  2. Configure the shared IP address within connectors of the nevisProxy services of the two servers.
Setting the shared IP address
  1. Choose the Ethernet device name of the shared interface within the nevisAgent configuration.
Selecting the Ethernet interface which is controlled by the nevisAgent
info

When adding new interfaces dynamically (e.g., VMWare server), the nevisAgent needs to be restarted to detect the new interface.